Motore PM42L-048-17 950g-cm Unipolar ST.193314

This is the motor you want if you are looking for a low cost unipolar stepper that needs to do some work.

Motor Controller and Connection

The following table shows how to connect the motor wires to the 1062 board connectors to get clockwise rotation. To wire for counter-clockwise rotation, swap the Black and Blue wires.

Wire Color Red Yellow Orange Black Blue Red
Board Connector + A B C D +

To connect the motor to the 1063, leave out the two Red wires.

Note: Make sure to unplug the power cord from the controller board before switching wires around.

Product Features

Good Torque
Step angle: 7.5°
Holding Torque: 950 g-cm @ 0.28 Amp

Product Specifications

Characteristic Value
Step Angle 7.5°
Step Accuracy 7%

Holding Torque 950 g-cm / 13.19 oz-in
Voltage 12V
Rated Current 0.28A

Shaft Diameter 3mm
Weight 138g
Number of Leads 6